Main Features
Dual filtration system for crisp, pure water.
UV sterilization eliminates harmful microorganisms.
Efficient performance with 520W power.
Warranty Coverage
At Water Service Company, trust is our priority. We promise top-notch water treatment solutions that stand the test of time. Rest easy knowing your investment is protected with our comprehensive warranties:
WaterBot UV
Backed by a 1-year limited warranty from the purchase date.
Got questions? We're here for you! Contact our customer service team for any warranty inquiries. Your satisfaction is our commitment.
Components
WaterBotUV
Filter
Display Panel
Model: WaterBot UV
Voltage / Frequency / Current: 115V/60Hz/6A
Rated Power: 520W
Heating Power: 420W
Refrigerating Power: 100W
Water Flow Rate: 0.31gal/min(43.51psig)
Hot Water Capacity: 1.05gal/h(≥185°F)
Cold Water Capacity: 0.52gal/h(≤50°F)
Applicable Environment: 39.2°F-100.4°F humidity ≤90%
Applicable Water Pressure: 14.5-60psig
Applicable Water: Tap water
Stage 1: PP filter
Stage 2: CB filter
System Dimensions: 15.2" x 14" x 43.9
Problem | Possible Cause | Suggested Solution |
---|---|---|
Small water flow | Low water pressureFilters need replacement | Check water inlet supply line and water valve is in ON position. Check PE tube for kinks, and straighten it.Please reference User Manual on how to replace filter |
Unsuitable water temperature | Over consumption of water in a short timeCooling or hot water switch in the off positionPower supply is turned off | Just wait a moment, and water is available againTurn on cooling or heating switchesLEDs on front panel should be on, if not check power supply to unit. |
Water leakage | Pipe not connected properlyWater pipe and PE pipe bursting | Inspect the connector to connect the pipe properlyReplace the water pipe and PE pipe |
Electric leakage | Machine in poor contact with ground | Use a three-pin socket with earth wire, making the machine grounded properly. |
Noisy operation | Not installed steadily | Place the machine on a steady & solid surface |
Machine fails to run | Power supply is turned off | LEDs on front panel should be on, if not check power supply to unit. |
It is a normal state that the following circumstances occur when the water purifier is used.
- During the heating, the heating tube may generate slight noises. This is a normal state.
- When the heating tank is being heated without water, the anti dry-burning device will disconnect automatically and can not reset by its own. The reset must be completed by a professional technician. The design is in accordance with the national safety requirements.
- When an ambient temperature is higher, the cooling capacity may be slower, which is a normal state.